Stamped Concrete Care & Maintenance

Only use products recommended by Deco Scapes…

The following are instructions for resealing stamped concrete. Don't hesitate to contact us if you have any questions on how to care for your stamped concrete.

1. Rinse dirt/debris off of stamped concrete surface with a pressure washer.
2. Apply a small amount of liquid dish soap to surface and scrub with a push broom.
3. Rinse well with a pressure washer until there is no sign of soap suds.
4. DRY surface completely by allowing 24 hours to air dry, prior to applying any sealer.
5. Important: Do not apply sealer to a damp/wet surface. Once the surface is completely dry, apply the sealer as follows:
   • Stir in one jar of Anti-Skid material to a 5 gallon pail of sealer.
   • Important: Apply sealer using a 3/4" nap roller only. Anti-Skid material will not transfer through a sprayer. Apply sealer in approximately 2' x 4' sections, be sure to maintain a "wet edge". This will ensure full coverage without missed spots. Keep stirring sealer while applying to keep the Anti-Skid suspended in the sealer.
   • Sealer should be applied when air temperature is above 55° F. Best results will be obtained by applying sealer during cooler temperatures - fall and spring in summer months the surface temperatures should be under 90° F.
6. A second coat can be applied after the first coat is tack free (not sticky to your touch). You should wait 24 hours before walking on the resealed areas.
7. Your stamped concrete should be resealed every 1-2 years to protect your investment. One 5 gallon pail of sealer will cover approximately 1,000 sf.

Don't hesitate to contact us if you have any questions on how to care for your stamped concrete. Call us at 513.353.1778 or use our contact form.